Solvline SG-3011PCL User Manual
Page 32
SerialGate User Manual
32
Select ‘TCP Client’ under connection type and enter the IP address and the port number for the
SG-3011PCL as shown below. Since SG-3011PCL only have one port, select ‘1Ports’. (This,
‘1Ports’, is a known typographical error which will be corrected later.)
Click the ‘Terminal’ button first, and click ‘Windows’ then ‘Tile’.
The users can enter the commands and get the values returned with the terminal window.
When using the commands to set the value and read from it, pin numbers are used. Each pin
names corresponding to the pin numbers are as follows.