Serial setting – Solvline SG-3011PCL User Manual

Page 20

Text mode
Original mode

SerialGate User Manual

Serial Setting

The ‘Serial Setting’ display the operating environment for the RS-232/422/485 port. The ‘Submit’ button
must be clicked in order to save the changes. To apply changed settings, the device must be rebooted.
If the submit button is not clicked to save the changed settings, when the device boot next time, the
changed value will not be applied.
The ‘Cancel’ button can be used to revert the settings back to the original state.
Information displayed in the ‘Serial Setting’ pages are show below.

Default

Description

Operation
Mode

COM
Redirector

Select the operation protocol that will be applied in the serial port.

COM Redirector

Use the serial port of SerialGate as a virtual COM port in Windows

2000/XP/2003/Vista.