Cisco 6500 - Manual (Page 42)

4-42
Cisco IOS Software Configuration Guide, Release 12.2SX
OL-13013-06
Chapter 4 Configuring Virtual Switching Systems
Configuring a VSS
Subcommands for VSL Port Channels
On a VSL port channel, only a subset of interface subcommands are available in the command console.
Table 4-2 describes the available interface subcommands.
Subcommands for VSL Ports
If a port is included in a VSL port channel, only a subset of interface subcommands are available in the
command console.
Table 4-3 describes the available interface subcommands.
Table 4-2 Interface Subcommands for VSL Port Channels
Subcommand Description
default Sets a command to its defaults.
description Enters a text description for the interface.
exit Exits from interface configuration mode.
load-interval Specifies interval for load calculation for an
interface.
logging Configures logging for interface.
mls Specifies multilayer switching subcommands.
no Disables a command, or sets the command
defaults.
shutdown Shuts down the selected interface.
switch virtual link Specifies the switch associated with this port
channel.
vslp Specifies VSLP interface configuration
commands.
Table 4-3 Interface Subcommands for VSL Ports
Subcommand Description
channel-group Adds the interface to the specified channel group.
default Sets a command to its defaults.
description Adds a description to the interface.
exit Exits from interface configuration mode.
load-interval Specifies interval for load calculation for an
interface.
logging Configures logging for the interface.
no Disables a command, or sets the command
defaults.
shutdown Shuts down the selected interface.