PRG Mbox Studio Manual v3.6.1 - Manual (Page 94)

88 MBOX ® STUDIO USER MANUAL
MBOX REMOTE OPERATION
About MBOX Remote
The MBOX Remote application is used for remote control and monitoring of MBOX. The application can
be used on any Mac computer (running
Leopard® X 10.5.7 or greater ) to monitor from a remote location.
MBOX Daemon
Before discussing the MBOX Remote application, it is important to note that MBOX Daemon software is
required on all servers to enable remote feedback to both MBOX Remote and to CITP/MSEX-enabled
devices. When MBOX launches, it will automatically launch the last version of MBOX Daemon used on
that computer.
MBOX Daemon is a background process and has no UI unless it is "forced" to be shown. To force
Daemon’s interface to be shown, press [  D] while MBOX is in Window mode.
To set the network port that MBOX and Daemon will use to communicate with external monitoring devices (like
Remote or CITP-enabled consoles and visualizers), use the CITP pop-up on the MBOX Setup tab as shown below:
Training Video: Mbox Media Server Training Video Chapter 7: Daemon Application
Set Network
Synchronization
Port
Set Network
CITP Port