PRG DMX Reference Guide 5.4 - Manual (Page 71)

DMX512 REFERENCE GUIDE 63
Three-Point Hang
A Series 300 third-point truss hook can be used to stabilize the luminaire in a three-point hanging configuration. The
third-point hook is bolted to the pan tube in addition to the standard double hook. The following illustration shows
how the hook is used to achieve a three-point hang.
Figure 3-13: Three-Point Hang
Custom Hang
Series 300 luminaires can also be hung using custom hanging devices. The pan tube's multiple mounting holes allow
flexibility for placement of hardware. To attach custom hanging devices to the pan tube, the following hardware can
be used:
+ 5/16"-18 x 1" HSCZ Grade 5 Bolt (53.7001.0003)
+ 5/16"-18 Zinc nut with nylon inserts (53.2025.0002)
Figure 3-14: Series 300 Pan Tube Hole Dimensions
Series 300
Double Hook
Third-Point
Hook
S300 Third-Point
Truss Hook
(22.9634.0195)
Pan Tube Top View
4.055 in
103 mm
0.375 in
9.5 mm
4.67 in
119 mm