PRG DMX Reference Guide 5.4 - Manual (Page 100)

92 DMX512 REFERENCE GUIDE
009 Rotating Gobos
9 Wheel position is open (no gobo)
8 Gobo position 6
7
Cycle from wheel position 0 to position 3
CW, from position 3 to position 0 CCW
repeatedly. Pause briefly on position 0 and
3
6
Cycle from wheel position 0 to position 2
CCW, from position 2 to position 0 CW
repeatedly. Pause briefly on position 0 and
2
5
Continuous change CW to next gobo posi-
tion on wheel (from 2 to 3,5 to 0) Gobos on
wheels do not rotate. Pause briefly on
each gobo
4
Cycle from wheel position 0 to position 2
to position 0 CW repeatedly. Pause briefly
on position 0 and 2(25%)
3
Cycle from wheel position 0 to position 2
CCW, from position 2 to position 0 CW
repeatedly. Pause briefly on position 0 and
2 (45%)
2
Cycle from wheel position 0 to position 2
CCW, from position 2 to position 0 CW
repeatedly. Pause briefly on position 0 and
2 (45%)
1
Cycle from wheel position 0 to position 2
CCW, from position 2 to position 0 CW
repeatedly. Pause briefly on position 0 and
2 (85%)
0
Cycle from wheel position 0 to position 2
CCW, from position 2 to position 0 CW
repeatedly. Pause briefly on position 0 and
2 (100%)
Table 4-5: VL6B/VL6C/VL6C+ Spot Luminaire Mechanical Tests (Continued)
Test Number Test Parameter Error Codes/Comments