Spc-36 sixpack controller, Spc-36 six – PRG DMX Reference Guide 5.4 User Manual
Page 43
DMX512 REFERENCE GUIDE
35
SPC-36 SixPack Controller
The SPC-36 controller is a 36-channel analog dimmer interface
that will interface to APS6 and C3 modules (only).
+
The unit receives power through a Series 200 lamp run.
+
In DMX512 mode, all channels are mapped to the default type:
incandescent with 0 percent preheat (0 volts output).
Note: Avoid fading an SPC-36 controller channel mapped to an APS6 (remote start) up and down. This will cause
shortened lamp life. APS6 channels should be set to a curve of "full at 1%" if possible.