PRG DMX Reference Guide 5.4 - Manual (Page 55)

DMX512 REFERENCE GUIDE 47
Series 300 Lamp Cable
Series 300 lamp cables have a 16-pin Amp CPC connector at both ends and come in two types:
shielded and unshielded.
+ The unshielded, gray-jacketed cables are used to connect VL5, VL5B, and VLM luminaires to
Smart Repeater units.
+ The shielded, black-jacketed lamp cables are used to connect VL5, VL5B, VL5Arc, VL6, VL7 and
VLM luminaires to Smart Repeater/Smart Repeater Plus units. The shielded cable has an
additional shield around the power conductors.
The cables are color coded at each end to denote standard lengths. For unshielded lamp cables:
white (4 feet), red (8 feet), yellow (16 feet), orange (40 feet), and blue (100 feet). For shielded lamp
cables: white (6 feet), red (12 feet), yellow (20 feet), orange (50 feet), blue (100 feet).
Maximum recommended length is indicated below:
Series 300 Smart Lamp Plus Cable
Series 300 Smart Lamp Plus cables have a 16-pin Amp CPC connector at both ends.
The shielded, black-jacketed lamp cables are used to connect VL6B and VL7 luminaires to Smart
Repeater Plus units. The shielded cable has an additional shield around the power conductors.
The cables are color coded at each end to denote the two standard lengths: orange (50 feet), blue
(100 feet).
Maximum recommended length is 100 feet.
Luminaire Cable Length
VL5, VL5B, VL5Arc 300 feet
VL6 150 feet
VL6B, VL6C/VL6C+ 70 feet
VL7, VL7U, VL7B, VL7UB 32 feet