PRG VL6C+ User Manual

Page 55

VL6C+ ™ SPOT LUMINAIRE USER MANUAL

CAUTION:

Do not touch gobo or color filters with bare fingers. Wear cotton gloves or other covering while

replacing.

Step

5. Using fingers, grasp frame of gobo or color filter and pull out of wheel hub (Figure 4-4.)

Figure 4-4: Replacing a Standard Gobo or Color Filter

Step

6. Noting proper orientation of carrier slot, insert new gobo or color filter into position and push fully into place.

Step

7. Re-install color/gobo bulkhead, as required, and re-connect cables to Yoke Termination PCB (Figure 4-3.)

Step

8. Re-install removable cover by positioning cover on head assembly and tightening two captive screws.

Gobo or Color Filter

Gobo or Color Wheel Hub

Carrier Slot