Troubleshooting, Basic troubleshooting guide – PRG VL6C+ User Manual
Page 50
42
VL6C+ ™ SPOT LUMINAIRE USER MANUAL
TROUBLESHOOTING
Basic Troubleshooting Guide
The following is a basic troubleshooting guide to get the luminaire up and running. For more extensive troubleshooting
and testing, refer to the VL6C+ Spot Luminaire Service Manual (02.9803.0010).
Symptom
Cause(s)
Refer to...
No power to luminaire
Input cable not connected to Smart Repeater
unit.
Power not applied to Smart Repeater unit.
No lamp output
No intensity value.
Your console user manual
APS6 Module breaker switch not turned on.
Lamp needs replacement.
Backcap not fully seated causing backcap safety
interlock to open.
Hot spot visible in beam
or beam not optimized
Lamp needs to be aligned.