Mounting the luminaire, Attaching a truss hook – PRG VL6C+ User Manual
Page 24
16
VL6C+ ™ SPOT LUMINAIRE USER MANUAL
MOUNTING THE LUMINAIRE
Attaching a Truss Hook
The VL6C+ Spot Luminaire can be hung horizontally or vertically from any structure designed to accommodate the
load created by this moving luminaire. In standard hanging applications, the VL6C+ Luminaire utilizes a Series 300
double truss hook, which is bolted to the pan tube. The hook can be oriented in 45 degree increments to provide
flexible mounting. (See
A special third-point truss hook, which mounts to the pan tube in addition to the double hook, is available to provide a
third point of support. (See
To attach a double truss hook:
Step
1. Determine type of installation and required orientation of truss hook.
Step
2. At pan tube, attach truss hook using four 5/16-18 x 1" bolts and 5/16-18 nuts (Figure 2-1).
Step
3. Ensure truss hook is secure.
Figure 2-1: Attaching a Truss Hook
Truss
Pan Tube
Hook
5/16-18x 1" Grade 5
Bolt (53.7001.0003)
5/16-18 Nut
w/ Nylon Insert
(53.2025.0002)
Old Style
S300 Double Hook
New Style
S300 Double Hook
(22.9634.0217)
S300 Third-Point
Truss Hook
(22.9634.0195)
NOTE:
Use four 5/16-18 x 1" Grade 5 Bolts when
installing a Series 300 Double Truss Hook.