Potter PFC-7501 - Manual (Page 2)

b
PANEL PROGRAMMER MODEL PFC-7500/PFC-7501
PROGRAMMING GUIDE
When using the PFC-7500/PFC-7501 panel for any listing organization's approved methods, refer to this manual and the
PFC-7500/PFC-7501 Installation Guide. These documents outline the installation and programming requirements of all
applications for which the PFC-7500/PFC-7501 is approved.
FCC NOTICE
This equipment generates and uses radio frequency energy and, if not installed and used properly in strict accordance with the
manufacturer's instructions, may cause interference with radio and television reception. It has been type tested and found to comply
with the limits for a Class B computing device in accordance with the specification in Subpart J of Part 15 of FCC Rules, which are
designed to provide reasonable protection against such interference in a residential installation. If this equipment does cause interference
to radio or television reception, which can be determined by turning the equipment off and on, the installer is encouraged to try to
correct the interference by one or more of the following measures:
Reorient the receiving antenna
Relocate the computer with respect to the receiver
Move the computer away from the receiver
Plug the computer into a different outlet so that computer and receiver are on different branch circuits
If necessary, the installer should consult the dealer or an experienced radio/television technician for additional suggestions. The installer
may find the following booklet, prepared by the Federal Communications Commission, helpful:
"How to identify and Resolve Radio-TV Interference Problems."
This booklet is available from the U.S. Government Printing Office, Washington D.C. 20402
Stock No. 004-000-00345-4
Copyright © 1995 - 2008 Potter Electric Signal Company, LLC
Information furnished by Potter Electric Signal Company, LLC is believed to be accurate and reliable.
This information is subject to change without notice.