beautypg.com

Built-in speedlight and ttl flash modes, Built-ifl speedlight and – Nikon n65 User Manual

Page 76

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

background image

■ Built-in Speedlight and TTL Flash modes

This camera is equipped with a built-in Speedlight that provides an angle

of coverage for a 28mm lens with a guide number of 12 (ISO 100, m) or

40 (ISO 100, ft.). When the subject is dark or backlit (except in B or '^a),

in (AUTO mode) or Vari-Program, the built-in Speedlight automatically
pops up. When the shutter is released, the flash fires to create natural­
looking flash photography utilizing Matrix Balanced Fill-Flash.

In P (Auto-Multi Program), S (Shutter-Priority Auto), A (Aperture-Priority

Auto) or M (Manual) exposure mode, when the subject is dark or backlit,
flash recommended indication ^ blinks in the viewfinder, and the

Speedlight pops up when the Speedlight lock-release button is pressed
and the Matrix Balanced Fill-Flash is possible. (In Manual exposure

mode. Standard TTL Flash is selected.) In addition to shooting in dim
light, the flash can be used in daylight to reduce shadows on the main

subject or to put catchlights in your subject’s eyes.

Five flash sync modes—Front-Curtain Sync (Normal Sync), Slow Sync,
Rear-Curtain Sync, Red-Eye Reduction and Red-Eye Reduction with

Slow Sync—are available with this camera.

• See below for the TTL Flash modes, page 80 for using the built-in Speedlight and

page 78 for the flash sync modes.

;;

Built-ifl Speedlight and

n

Matrix Balanced Fill-Flash
Matrix Balanced Fill-Flash is automatically set in

, Vari-Program, P, S or A exposure mode, in

this flash mode, a well-balanced exposure of the

main subject (subject in focus) and the
background is achieved—based on the brightness

sensed by the Matrix Metering.

Standard TTL Flash

Standard TTL Flash is automatically selected

when the exposure mode is set to M. In Standard

TTL Flash, the main subject is correctly exposed

but background exposure is not considered.

Standard TTL Flash is useful when you want to

highlight the main subject.

76

This manual is related to the following products: