Check points – Nikon n65 User Manual

Page 65

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Compose picture, confirm focus

indicator • and shoot.

• The first shot is taken and

and frame counter

biink in the LCD panei when the shutter reiease
button is fuiiy depressed. The frame counter in the

LCD panel does not count up and the film does not

advance and multiple exposures can be taken from
the second shutter release. The multiple exposure

is canceled, film advances and

disappears from

the LCD panel when the second shot is taken.

• To take more than two shots on the same frame,

rotate the Command Dial while pressing the @

button again after first shot is taken by depressing

the shutter release button and while

is blinking

appears without blinking. Repeat this

operation as many times as you wish to continue

taking pictures on the same frame.

• To cancel multiple exposure, rotate the Command

Dial while pressing the 0 button so the display

disappears from the LCD panel. Film is advanced
and frame counter counts up when the multiple
exposure is canceled before or during multiple
exposure operation.

Check points

• Multiple Exposure cannot be performed in the d (AUTO mode) or Vari-

Program.

> Multiple Exposure and Auto Exposure Bracketing (page 62) cannot be set

simultaneously.

This manual is related to the following products:

N65QD