Pull film leader across to red index mark – Nikon n65 User Manual
Page 20
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Turn the power switch on and load DX-coded film. With DX-coded film,
film speed will be set automatically (ISO 25-5000). Closing the camera
back after loading film automatically advances the film to the first frame.
1
Turn the power switch on, open the
camera back by sliding the camera back
lock release lever and load film.
• Film cartridge can be loaded smoothly if inserted
from the bottom.
Pull film leader across to red index mark.
• Do not insert the film leader beyond the red index
mark.
• Hold the film cartridge and ensure film is properly
positioned with no slack.
Shutter curtains are very thin. Do not touch the shutter
curtains with your finger or the film leader.
20