Nikon n65 - Manual (Page 107)

Autofocus TTL phase detection, Nikon Muiti-CAM900 autofocus moduie with
AF-Assist iiiuminator (approx. 0.5m-3m or 1.6-9.8 ft.)
• Detection range: EV -1 to EV 19 (iSO 100, at normai temperature)
Lens servo AF: Auto-Servo AF: camera automaticaliy chooses Singie Servo AF or
Continuous Servo AF operation according to the subject status, i.e.
stationary or moving (inciuding directionai information).
• Singie Servo AF (focus is iocked when the subject is in-focus)
• Continuous Servo AF (camera continues to focus on a moving
subject) Focus Tracking with Lock-On"'“ automaticaiiy activated
by subject’s status
M: Manuai focus
Focus area One of five focus areas can be selected
Focus Area mode • Dynamic AF Mode with Ciosest-Subject Priority
• Dynamic AF Mode
• Single Area with M focus mode
Metering system TTL fuii-aperture exposure metering system
Three metering systems seiectabie (iimitations with iens used)
• 3D six-segment Matrix Metering: with D- or G-type AF Nikkor
• Six-segment Matrix Metering: with AF Nikkor other than D- or G-
type (except AF Nikkor for F3AF and IX-Nikkor), Ai-P Nikkor
• Center-Weighted Metering: automaticaiiy selected with Manual
exposure mode
Metering range 3D Matrix Metering: EV1-20
Center-Weighted Metering: EV 1-20
(at normai temperature, iSO 100, f/1.4 lens)
Exposure meter coupling CPU
Exposure CompensationE^osure compensated in ±2 EV range, in 1/2 steps (except in M or
Auto Exposure
Bracketing
Bracketing range: ±2 EV; number of^ots: three; bracketing
steps: 0.5, 1, 1.5 or 2 EV (except in a or Vari-Program)
Fiim speed setting • Automaticaiiy set to ISO film speed of DX-coded film in use (manual
not selectable)
• Film speed range: DX: ISO 25-5000, automatically set to ISO 100
with non-DX-coded film
107