Set date and time (n65qd ohly)fl, Note: battery requirements for imprinting – Nikon n65 User Manual
Page 22
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Set Date and Time (N65QD ohly)fl
This camera allows you to imprint Year/Month/Day, Day/Hour/Minute (24-
hour clock), Month/DayA'ear or Day/Month/Year on your picture in any
exposure mode. (For imprinting date/time, see page 39.)
Adjusting date and time (Example: year 2001, January 15)
Push MODE button to select one of the
date or time displays. Push SELECT
button so section to be corrected starts
blinking.
1
' Date cannot be set in Day/Hour/Minute display. To
set date, select Year/Month/Day, Month/Day/Year or
Day/Month/Year.
' Set the time in Day/Hour/Minute display.
11'G ; isl
№9 SELECT ADJUST
• • •
( O O O )
Push ADJUST button to change the
blinking numbers and after correction,
push SELECT button until the numbers
stop blinking.
• Each time you push the ADJUST button, year section
moves up from 98 to 49 (back to 98 after 49).
• To change the numerical indication rapidly, hold the
ADJUST button down for more than 1 sec.
• Push SELECT button until the date/time display
stops blinking. When the imprint indicator ^
appears in the data imprint LCD panel, the setting
is complete.
NOTE: Battery requirements for imprinting
Imprinting of date/time requires one CR2025 3V lithium battery separate from the
batteries required for the camera body. Battery life is approx. 3 years. When the
imprinting on the photo appears faded and/or the display of the data imprint on
the LCD becomes faint or disappears, this indicates low battery power. Replace
the battery (making sure to set correct date/time after changing battery).
22