Dx-coded film, Check points, I?5 fs.5 – Nikon n65 User Manual
Page 21
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
i?5 fS.5
j e a i d
Gently close the camera back until the
camera back snaps closed. Film
automatically advances to the first frame.
• When t appears on the LCD panel, the film has
advanced to the first frame.
•When Err and E in the LCD panel and Err in z
viewfinder blink, fiim is not properly installed. Open 2
the camera back again and reload film.
<
• Frame number display remains when the power <
switch is off.
2i
IT
a
DX-coded film
With DX-coded film, film speed will be set
automatically between ISO 25 to ISO 5000.
Film speed is set to ISO 100 with non-DX-
coded film.
Check points
>
Avoid direct sunlight when changing film outdoors.
>
You can check the number of available exposures on the film roll and film
speed through the film confirmation window.
• Infrared films cannot be used with this camera since an infrared sensor is used
for the detection of the film frame position.
21