Nikon n65 - Manual (Page 63)

Electronic analog
exposure display
First shot
(correct EV)
Second shot
(under EV)
Third shot
(over EV)
Compose picture, confirm focus
indicator • and shoot.
• Each time the shutter release button is depressed,
correct EV, under EV, and over EV exposure are
performed in that order while the blinking electronic
analog exposure display shows the correct, under,
then overexposure. Compensated shutter speed
and aperture values are displayed during shooting.
• If the Exposure Compensation function (page 61) is
also set, bracketing will be combined with the
Exposure Compensation values. It is useful to
perform Bracketing with a compensated value of
over +2 EV or under -2 EV.
• If the end of the film roll is reached during
bracketing, the remaining shots can be taken after
new film has been loaded. Also, if you turn the
power switch off during bracketing, the remaining
shots can be taken after the power is turned back
on.
Auto Exposure Bracketing is completed
and automatically canceled when the
third shot is taken.
• I2l and iSI in the LCD panel and IZl and the
electronic analog exposure display in the viewfinder
disappear when the bracketing is completed.
• To cancel the bracketing, rotate the Command Dial
while pressing the @ button so the display
disappears from the LCD panel. Bracketing is not
canceled by turning the power switch off.
Check points
»Auto Exposure Bracketing cannot be performed in iSS (AUTO mode) and Vari-
Program.
» Auto Exposure Bracketing and Multiple Exposure (page 64) cannot be set
simultaneously.
• Auto Exposure Bracketing and Long Time exposure (page 60) cannot be set
simultaneously.
63