Focus aréaj ■ ■ ■ ■ ■ ■ ■ ittf – Nikon n65 User Manual
Page 46
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Focus AréaJ ■ ■ ■ ■ ■ ■ ■ iTTf
This camera’s five focus areas cover a wide frame area, and you can
select among them, depending on the subject’s position in the frame or
your desired composition. When the focus mode is set to AF (autofocus,
page 44), you can select either Dynamic AF Mode with Closest-Subject
Priority, where the camera automatically selects the focus area, or
Dynamic AF Mode, where you select the desired focus area.
Set the focus mode selector to AF
(autofocus) and rotate the Command Dial
while pressing the focus area button to
select focus area.
’ Rotating the Command Dial while pressing the focus
ÌEgH[3nE]L]l
area button changes the display as follows:
1
AUTO
Mi
ill
~'d
Dynamic AF Mode with
I Closest-Subject Priority
Dynamic AF Mode
I
CZJ'
c
'S fS.6
L
r
J
' Confirm selected focus area in the LCD panel and
viewfinder.
• Dynamic AF Mode with Closest-Subject Priority
Dynamic AF Mode with Closest-Subject Priority automatically maintains focus on
the subject located closest to any of five focus areas and focus is locked once it
is achieved. If the subject moves from the selected focus area before focus lock,
the camera automatically focuses on the subject determining the data from the
other focus areas. When AUTO mode or Vari-Program (except A Close-Up
mode) is selected. Dynamic AF Mode with Closest-Subject Priority is
automatically selected.
• Dynamic AF Mode
Focus is obtained at the selected focus area and focusing is locked (as long as
the shutter release button is lightly pressed) once it is achieved. If the subject
moves from the selected focus area before focus lock, the camera automatically
focuses on the subject determining the data from the other focus areas. When A
Close-Up mode is selected. Dynamic AF Mode and center focus area are
automatically selected.
46