Oakworks PT Table - Manual (Page 4)

This symbol, when used in this manual and on product labels, represents a caution
warning. Be sure to read and comply with all precautions and warnings.
This symbol, when used in this manual and on product labels, warns against an
electrical shock hazard. Be sure to observe and comply with all warnings.
This symbol, when used in this manual or on product labels, indicates a Protective Earth
(Ground) Terminal.
This symbol, when used in this manual and on product labels, indicates that the table
and components are a Type B Applied Part pursuant to IEC 60601-1: 2005.
This symbol, when used in documentation on this product, indicates alternating
current (AC).
This symbol, when used in documentation on this product, indicates direct current
(DC).
This symbol is used to indicate that the operator should consult the user manual.
~
----
PRODUCT USe DeSCRIPTIOn / IMPORTAnT SAfeTy InSTRUCTIOnS
1
PRODUCT USe DeSCRIPTIOn
The Oakworks PX & PT Tables are used to support the patient during examinations and procedures.
They are intended to be operated by a healthcare professional in a medical environment. No special
training is required but a review of the following Safety Instructions is important for the safety of
the operator and patient. The healthcare professional should read and understand this entire manual
before use with a patient. There are no known contradictions to the use of this equipment.
SyMbOl IDenTIfICATIOn
CAUTIOn ReAD AnD SAve TheSe InSTRUCTIOnS
The use of accessories, transducers, and cables other than those specified by the manufacturer, may result in increased emissions or
decreased immunity of the table.
The Table should not be used adjacent to or stacked with other equipment and that if adjacent or stacked use is necessary, the table should
be observed to verify normal operation in the configuration in which it will be used.
The Table is designed to be a stand-alone table. This table must not be modified or incorporated into any other equipment.
As with any moving mechanism there are potential pinch points around and underneath the table. It is the responsibility
of the operator of this equipment to insure that bystanders are not in the area below or around this equipment during opera-
tion.
Proper operation of this equipment is very important for the safety of the operator, patient, and any other individuals in the
area of this equipment. Directions for use of this equipment are described in this manual. The operator should read these sections
carefully.
IMPORTAnT SAfeTy InSTRUCTIOnS