Oakworks PT Table - Manual (Page 23)

Watch the
video!
Dr. Robert DuVall,
PT, DHSc, ATC, OCS, SCS, FAAOMPT CSCS
At the Oakworks® factory in PA
reviewing the Oakworks® PT400.
Dr. Robert DuVall demonstrates the features of the PT400 table.
Scan this QR code with
your smartphone or visit
www.oakworksmed.com
to view the PT400 video.
posterior pelvic tilt
Side bend to
elongate the
quadratus
lumborum
Back rest
Control
TO lOWeR The bACK ReST:
Press the lever under the head section and
push the back rest down.
TO RAISe The bACK ReST
Raise the back rest by pressing the lever
under the head section and lifting up to the
desired height. It is recommended that clients
take some of their weight off the back rest
while you lift.
CAUTIOn
ADjUSTInG The bACK ReST SeCTIOn
Do not sit on the Backrest section.
20
DIReCTIOnS fOR USe
OPTIMAl POSITIOnInG fOR PT400 TAbleS
TO ChAnGe leveR POSITIOn:
The back rest lever can be moved to the
opposite side of the back rest by removing
the screws and relocating the hand lever to
the opposite side of the top into the four pre-
drilled holes.
PX150 TAbleS Only