Warning, Read and save these instructions, Grounding – Oakworks PerformaLift Series User Manual
Page 9
6
INSTALLATION
INSTALLATION
The tables come completely assembled and ready to use. Plug the cord
into a functioning outlet that is rated for the table.
Arrange the power cord and control cords so that they will not create a
tripping hazard and where the controls are located to your liking and
are conveniently accessible.
To disconnect the table from electrical power, remove the plug from the
outlet. Be sure access to plug is not blocked for disconnecting the table
from power.
This product must be grounded. If it should malfunction or break down,
grounding provides a path of least resistance for electrical current to reduce
the risk of electric shock. This product is equipped with a cord having an
equipment-grounding conductor and a grounding plug. The plug must be
plugged into an appropriate outlet that is properly installed and grounded in
accordance with all local codes and ordinances. See U.S. sample below.
This product is manufactured for use on a nominal 120-volt circuit for the
United States and a nominal 220-volt circuit for use in Europe. The plug has
a grounding pin (see figure A) in a pattern that varies by country as shown
in the Product Identification section of this manual. Make sure that the
product is connected to an outlet having the same configuration as the plug.
Correct Implementation
Incorrect Implementation
DANGER-
Improper connection of the equipment-grounding conductor
(see figure B) can result in a risk of electric shock. Check with a quali-
fied electrician or service man if you are in doubt as to whether the product
is properly grounded. Do not modify the plug provided with the product
- if it will not fit the outlet, have a proper outlet installed by a qualified
electrician.
To reduce the risk of electric shock, this furnishing has a polarized plug.
This plug will fit in a polarized outlet only one way. Do not change the
plug in any way.
Be sure to read all
cautions, warnings
and instructions given
in the manual to prevent
injury to both operator
and client.
GROUNDING
WARNING
Figure A
Figure B
READ AND
SAVE THESE
INSTRUCTIONS