Oakworks PerformaLift Series User Manual

Page 4

SYMBOL IDENTIFICATION

SYMBOL

IDENTIFICATION

SYMBOL IDENTIFICATION

This symbol, when used in this manual and on product labels, represents a caution

warning. Be sure to read and comply with all precautions and warnings.

This symbol, when used in this manual and on product labels, warns against an electrical

shock hazard. Be sure to observe and comply with all warnings.

This symbol, when used in this manual or on product labels, indicates a Protective

Earth (Ground) Terminal.

This symbol, when used in this manual or on product labels, indicates the date of

manufacture of the device.

This symbol, when used in this manual or on product labels, indicates alternating

current (AC).

This symbol, when used in this manual or on product labels, indicates direct current

(DC).

This symbol is used to indicate that the operator should consult the user manual.

----

INTRODUCTION

Oakworks PerformaLift Series offers a variety of positioning capabilities for massage

therapists and spa professionals of all specialties. On these multifunctional professional

tables the practitioner can perform numerous protocols with ease and comfort. The

fully electric PerformaLift Series is especially effective when professional protocols

require specific positioning for the client or patient. While the client receives comfort-

able, relaxing support, the comfort level of the therapeutic professional is enhanced by

superior ergonomics.

This table is intended to be operated by a Massage Therapist in a professional environ-

ment. No special training is required but a review of the following Safety Instructions

is important for the safety of the operator and patient. The massage professional

should read and understand this entire manual before use with a client. There are no

known contraindications to the use of this equipment.

The PerformaLift Series should not be used in any other manner than that described

within this manual. Use of any unnecessary force or unauthorized procedures could

result in injury to practitioner, client or equipment.