Oakworks PerformaLift Series - Manual (Page 11)

8
INSTALLATION
INSTALLATION
CAUTION
Before doing any work on the
table, disconnect the power
cord from the power outlet
and secure the electrical
cord, and foot controls for
moving.
The table weighs as much
as 235 lbs.
DO NOT lift or
move the unit without using
proper safety procedures
or equipment.
DO NOT turn
the table on its side for any
reason. To do so could
cause damage to the base
and
will void the warranty.
There are no serviceable
items that require this action
.
Never lift the table by grasping
the table top as the table
top is not
designed to hold
the weight of the base and
you could damage the table.
at low height range
Grasp
at base
corner
The table weighs approximately 235 lbs. (107 kg) You will need 4 people
working together if it is necessary to move the table. Never lift the table by
grasping the table top as the table top is not designed to hold the weight
of the base and you could damage the table and the electronics that run
the tabletop.
If you need to move the table, place one person at each corner of the
table. Have each person firmly grasp the base at the bottom and lift
the table. As when moving any piece of heavy equipment, bend at the
knees and lift with your legs beneath you and not with your back. Be
aware and use proper, safe procedures for moving a table of this size to
prevent injury to yourself or the table. We strongly recommend that a
flatbed dolly be used that can hold the entire table if moving the table
involves any distance.
CAUTION
MOVING THE TABLE