Oakworks Celesta/Clodagh Gemini - Manual (Page 8)

3
INSTALLATION
The Tables come completely assembled and ready to use. Plug the cord into a functioning outlet that is rated
for the table. (see Grounding below)
Arrange the power cord and control cords so that they will not create a tripping hazard and where the
controls are located to your liking and are conveniently accessible.
Be sure access to plug is not blocked for disconnecting the table from power.
This product must be grounded. If it should malfunction or break down, grounding provides
a path of least resistance for electrical current to reduce the risk of electric shock. This
product is equipped with a cord having an equipment-grounding conductor and a ground-
ing pin. The pin must be plugged into an appropriate outlet that is properly installed and
grounded in accordance with all local codes and ordinances. See U.S. sample above.
Correct Implementation Incorrect Implementation
Risk of Electric Shock - Connect this furnishing to a properly
grounded outlet only.
DANGER
 
GROUNDING
Improper connection of the equipment-grounding conductor can result in a risk of electric
shock. Check with a qualified electrician or service person if you are in doubt as to whether
the product is properly grounded. Do not modify the plug provided with the product - if it
will not fit the outlet; have a proper outlet installed by a qualified electrician.
Grounding Methods
No adapter should be used with this product. See Figure B