Oakworks Celesta/Clodagh Gemini - Manual (Page 4)

SYMBOL IDENTIFICATION
SYMBOL IDENTIFICATION & IMPORTANT SAFETY
INSTRUCTIONS
IMPORTANT SAFETY INSTRUCTIONS
This symbol, when used in this manual and on product labels, represents a caution warn-
ing. Be sure to read and comply with all precautions and warnings.
This symbol, when used in this manual and on product labels, warns against an
electrical shock hazard. Be sure to observe and comply with all warnings.
This symbol, when used in this manual or on product labels, indicates a Protective Earth
(Ground) Terminal.
This symbol, when used in this manual and on product labels, indicates that the table and
components are a Type B Applied Part pursuant to IEC 60601-1: 2005.
This symbol, when used in documentation on this product, indicates alternating
current (AC).
This symbol, when used in documentation on this product, indicates direct current (DC).
This symbol is used to indicate that the operator should consult the user manual.
~
----
CAUTION READ AND SAVE THESE INSTRUCTIONS
• Close supervision is necessary when this furnishing is used by, or near, children, invalids or disabled per-
sons. DO NOT leave children alone or allow them to operate the controls. Remove key and store out of reach of
children. DO NOT allow children to crawl into the cabinet or under the table.
• The moving mechanism parts of this table may result in pinching or entrapment of hands or feet. It is the respon-
sibility of the operator to insure that bystanders are not in an area where they can be injured by this equipment.
Do not allow anyone under or within arm’s reach (approx. 3 feet) of this table during operation.
• Be certain that the table is completely lowered prior to removing client. They may lose balance and fall.
Do not leave clients unattended when table is set at its highest level.
• The table weighs as much as 300 lbs. (136 kg.) DO NOT lift or move the unit without using proper
safely procedures or equipment. DO NOT turn the table on its side for any reason. To do so could
cause damage to the base and will void the warranty. There are no serviceable items that require this action.
Never lift the table by grasping the table top as the table top is not designed to hold the weight of the
base and you could damage the table.
• When operating the table controls and making any and all adjustments to the table, move hands
and feet away from the working mechanism of the table. Use care when opening the doors all the way so
that you do not pinch or injure your fingers. Either arm rest can be repositioned to allow a client to get
on and off the table easily. When making adjustments to the arm rests make certain that the client’s arms
are away from the working mechanism.
ii