Canon CR-1 MARK II - Manual (Page 122)

8. Before calling the service technician (Error)
-114-
10024
311 No main image is selected. Select an image.
10308 No image is selected. Select the target image.
10031 3
No Manual or Mag/Barcode Input module is set.
At least one is required.
Select the Manual Input Module tab (see page 83)
or the Mag Barcode Input Module tab (see
page 86).
10040
104 No Storage Directory Check the name of the storage folder.
105 Failed to create a folder. Check the access permissions for the storage folder.
106 The same file name exists in the storage directory.
Either change the name of the storage file, or delete
the file with the same name.
107
Error occurred when the file was moved to the
storage directory.
Check the access permissions for the storage file.
10045
5
Failed to search worklist.
It may be caused by communication failure with
the worklist server.
Check that the worklist server is operating properly.
25
Failed to initialize the magnetic card/bar code
device. Check the magnetic card/barcode reader connection.
The magnetic card/barcode reader settings need to
be made.
Please contact a Canon representative or
distoributor.
10048 41
Failed to initialize the magnetic card/bar code
device.
10049
11 Failed to register Patient Info. in the database.
The study progress status could not be saved to the
study file. Check if the study file (ccrhis.his) is set to
read-only.
49
Failed to initialize the magnetic card/bar code
device.
Check the magnetic card/barcode reader connection.
The magnetic card/barcode reader settings need to
be made.
Please contact a Canon representative or
distoributor.
50
The studies were not read. Number of studies
exceeded the maximum to read. Please reduce the number of studies in the study file
(ccrhis.his) to the number of displayable studies.
10052
100 No printer is installed.
Install the printer from the Printers and Faxes screen
in the Control Panel.
200 No main image is selected. Select the printing image.
201
Image Read Error
Only print info. is output since image reading has
failed. The printing information and the text “NO IMAGE”
are printed for images where a reading error has
occurred.
300
Print Error
Printing is cancelled.
Check the printer server and network cable
connections.
301
Print Error
Printing is cancelled.
10053 8
Failed to communicate with the magnetic card/bar
code reader.
Check the cable.
Check the settings.
Check the magnetic card/barcode reader connection.
The magnetic card/barcode reader settings need to
be made.
Please contact a Canon representative or
distoributor.
10056
204 No Storage Directory
Refer to 7.6 Storage (see page 92), click [Edit] in
the storage setting screen, and check the storage
directory.
205 The same file name exists in the storage directory.
Either delete the file with the same file name at the
storage directory, or change the storage.
206 Failed to save JPEG File.
Refer to (2) in 2.1 Software (see page 3), and set
the proper access privileges for the storage folder.
207 Failed to create a folder.
Refer to (2) in 2.1 Software (see page 3), and set
the proper access privileges for the storage folder.
10063 1
JPEG File Saving Error
[Error description] Refer to the error description, and check the file into
which the data is to be saved.
module id message id Message Detail