Canon CR-1 MARK II - Manual (Page 102)

7. Settings
-94-
5 Check the connection with the server. (When Storage Server has been selected)
When Storage Server has been selected as the Storage Type, click [Connection Check...].
The Information screen is displayed if the connection has been made properly.
When [OK] is clicked, the Information screen is closed.
Information screen
6 Set the storage to the default.
To set as the default storage, check Set as Default Storage.
However, because a maximum of two default storages can be set, it cannot be checked if two storages
are already set.
7 Register the storages.
Click [OK].
When the Warning screen is displayed
Check the following points if the Warning screen is displayed.
• The network is functioning properly.
• The server is operating properly.