MF Digital Spectrum 2 Thermal - Manual (Page 75)

Spectrum2 Printer Operator’s Guide
Document Revision: 102803
74
Autoloader Port
Connector and Signal information:
Pin Number Signal Name I/0 Function Logic 1
(5 Volts)
Logic 0
1 CPBSY Output Printer Busy Printer Busy Printer
Available
2 CTOUT Output Tray Out Tray
Extended Tray
Retracted
3 CTIN Output Tray In Tray
Retracted Tray
Extended
4 CCDINTRAY Output CD on Tray CD Present No CD
Present
5 P_CCMD Input Print Buffer
Command No Action Prints label
image in
buffer
6 O_CCMD Input Move Tray
Command No Action Toggles tray
In or Out
7 CPERR Output Printer Error Error Exists No Error
8 CRIBOUT Output Ribbon Out No Ribbon
Detected Ribbon
Detected
9 Ground Ground N/A N/A
Note:
• P_CCMD and O_CCMD must receive a logic low pulse of at least 70ms for the
command to be valid.
• MF DIGITAL Autoloaders send valid P_CCMD and O_CCMD pulses of 800ms.
Autoloader Port Pinouts:
5 4 3 2 1
9 8 7 6