Maxim Integrated 71M6534 Energy Meter IC Family Software - Manual (Page 68)

71M653X Software User’s Guide
• PHASE_ANGLE.H – phase angle calculation
• PSOFT.H – pulse generation by MPU software (external pulse generation)
• PULSE_SRC.H – pulse source definitions and support
• RMS.H – RMS calculation
• VAH.H – VAh accumulation
• VARH.H – VARh accumulation
• WH.H – Wh accumulation
• DIO.H – DIO structures, enumerations and definitions
• FLASH.H – flash copy and CRC routines
• IRQ.H – interrupt kernel
• LIBRARY.H – library routines
• MATH.H – meter math library
• PRIORITY.H – interrupt masks and priority definitions
• SERIAL.H – serial interface structures, enumerates and definitions
• SFRS.H – low-level API for SFRs and memory
• STDINT.H – standard integer definitions
• STM.H – software timer definitions
• WD.H – watchdog bit definitions
5.12 CE IMAGE FILES
The CE code uses pre-designed, pre-validated algorithms and calculations, which are accurate to the noise floor of the
integrated circuit, saving substantial engineering and development time.
The source code for the CE is proprietary. Only the code and data images (binary images) are available to the user.
The code image must be merged with the MPU code residing in flash memory.
Images of the CE data and program code are provided with the Demo Kits. They are to be linked into the object code.
CE images are provided by the following files:
1. CE31_CE.C:
This file provides the image of the 71M6531 CE program in C notation.
2. CE31_DAT.C:
This file provides the image of the 71M6531 CE default data in C notation.
3. CE34_CE.C:
This file provides the image of the 71M6534 CE program in C notation.
4. CE34_DAT.C:
This file provides the image of the 71M6534 CE default data in C notation.
v1.1v1.1 TERIDIAN Proprietary 68 of 116
© Copyright 2005-2008 TERIDIAN Semiconductor Corporation