KGUARD Security SHA24 - Manual (Page 27)

ENGLISH
Chapter 3: Getting Started
DVR User’s Manual
27
3.7 Manual Recording
With this function, you can manually record the video. The system will continuously record the video until you
manually stop the recording.
To enable manual recording:
1
In the preview mode, right-click on the mouse to display the Pop-up menu.
2
Select Manual Record.
The video recording starts.
To stop the manual recording:
1
Right-click on the mouse to display the Pop-up menu.
2
Select Stop Manual Record.
The video recording stops.
3.8 Switching Video Output
With this function, you can switch the GUI output between the 2 monitors (VGA or BNC). By default, the video output
connection is set to VGA.
To switch to BNC output:
1
In the preview mode, right-click on the mouse to display the Pop-up menu.
2
Select GUI on BNC.