Chapter 3: getting started, 1 starting up, 2 shutting down – KGUARD Security SHA24 User Manual
Page 17: 1 starting up 3.2 shutting down
ENGLISH
Chapter 3: Getting Started
DVR User’s Manual
17
Chapter 3: Getting Started
3.1 Starting Up
Connect the power adapter to the DVR. See
“2.2 Connecting the Power” on page 13
for further details.
The DVR automatically powers on and the 4 or 8-window display appears on the screen.
Note:
• 8-window display is shown on an 8-channel DVR, and a 4-window display on a 4-channel DVR.
3.2 Shutting Down
To properly turn off the DVR power, do the following:
1
In the preview mode, right-click on the mouse to display the pop-up menu.
2
Select Main Menu > SYSTEM > MAINTAIN, and double-click Power off.
You can also access the main menu by pressing the MENU button on the remote control or the Menu key on the
front panel.
3
A warning message appears on the screen, select OK to turn off the power.
4
Wait until the “Now you can power off!” message appears on the screen, then unplug the power cord from the
power outlet.