KERN & SOHN CCS Version 2.0 - Manual (Page 81)

CFS/CCS-BA-e-1220 81
18.1 Error messages
Error message Description Possible causes
Zeroing range exceeded
due to switching-on balance
or pressing (normally
4% max)
Object on the weighing
plate
Overload when zeroing
Inappropriate
adjustment
Damaged weighing cell
Damaged electronics
Keyboard error Improper use of the
balance
Value outside the A/D
changer range Weighing plate not
installed
Damaged weighing cell
Damaged electronics
Adjustment error Inappropriate adjustment
Should other error messages occur, switch balance off and then on again. If the
error message remains inform manufacturer.