KERN & SOHN CCS Version 2.0 - Manual (Page 71)

CFS/CCS-BA-e-1220 71
 Automatic zero point correction (Autozero) by changing the
display, digits selectable (0.5d, 1d, 2d, 4d)
 Press , the currently set value is displayed.
Press to select the desired setting (0.5d, 1d, 2d, 4d) and
acknowledge by pressing .

 Zero setting range
Load range where the display after switching-on the balance is
set to zero
 Press , the currently set zero setting range is displayed.
Press to select the desired setting (0 %, 2 %, 5 %, 10 %,
20 %) and acknowledge by pressing .

 Zero setting range
Load range where the display is set to zero by pressing .
 Press , the currently set auto-zero range is displayed.
Press to select the desired setting (0 %, 2 %, 5 %, 10 %, 20
%) and acknowledge by pressing .

 Password input for menu block „ “
 Press
, will be shown. Use the numeric
keyboard to enter the desired code and acknowledge with
.



is displayed, request to repeat the password
input.
Enter code anew and press to acknowledge. If entry was
successful, is displayed, if false,
appears. In this case repeat the code input.
