KERN & SOHN CCS Version 2.0 - Manual (Page 48)

48 CFS/CCS-BA-e-1220
12 Weighing to a certain target weight /target quantity and
tolerance control
The balance allows weighing of goods to a certain target weight (net weight) or
target piece number within defined tolerances. With this function one can also
check if the weighing good is within a defined tolerance range. Tolerance control is
possible in weighing or target mode.
Reaching the target value is indicated by an acoustic (if activated in menu) and an
optic signal (tolerance mark ).
12.1 Tolerance control in weighing mode
Operation Display
 Press
, the active tolerance weighing mode is
indicated.
 If necessary select with or (CFS 50K-3
models) „Tolerance control weighing mode“
[
].
 Press the key TARE, which shows the currently set
upper threshold.
 Using numeric keyboard enter desired value or
delete using .

 Press the key TARE which shows the currently set
lower threshold.
 Using numeric keyboard enter desired value or
delete using .
