KERN & SOHN CCS Version 2.0 - Manual (Page 43)

CFS/CCS-BA-e-1220 43
11 Counting
During piece counting parts can either be counted into a container or out of a
container. To count a greater number of parts the average weight per part has to be
determined with a small quantity (reference quantity). The larger the reference
quantity, the higher the counting exactness.
High reference must be selected for small parts or parts with considerably different
sizes.
The average piece weight can only be determined by stable weighing
values.
If weighing values are under zero, the piece counter display shows a
negative number of items.
The precision of the average unit weight can be increased at any time
while units are being counter by inputting the displayed number of units
and confirming by or (in CFS 50K-3 models). After the reference
optimization sounds a signal tone. As the additional pieces increase the
base for the calculation, the reference also becomes more exact.