KERN & SOHN CCS Version 2.0 - Manual (Page 75)

CFS/CCS-BA-e-1220 75
 Press , „div“ is displayed
 Press
, the currently set legibility is displayed,
 Using
select the desired readibility
 Acknowledge by .

(example)
 Press , „A2t“ is displayed
Automatic zero point correction (Autozero) by changing the
display, digits selectable (0.5d, 1d, 2d, 4d)
 Press , the currently set value is displayed.
Press to select the desired setting (0.5d, 1d, 2d, 4d) and
acknowledge by .

 Press , „0 mAnL“ is displayed
 Zero setting range: Load range where the display is set to
zero by pressing .
 Press
, the currently set auto-zero range is displayed.
Press to select the desired setting (0 %, 2 %, 5 %, 10 %,
20 %) and acknowledge by pressing .

 Press , „Pin“ is displayed
 Password input for menu block „ “
 Press , will be shown. Use the numeric
keyboard to enter the desired code and acknowledge with .


 is displayed, request to repeat the password
input.
Enter code anew and press to acknowledge. If entry was
successful, is displayed, if false,
appears. In this case repeat the code input.
