KERN & SOHN CCS Version 2.0 - Manual (Page 15)

CFS/CCS-BA-e-1220 15
6.3.2 Counting system
KERN CCS
Reference balance CFS 3K-5, CFS 6K0.1, CFS 15K0.2, CFS 30K0.5 models:
 
Bulk material balance KERN KFP Reference balance KERN CFS
Reference scales Models CFS 50K-3
Bulk material balance KERN KFP Reference balance KERN CFS
In factory the counting system KERN CCS is preconfigured in a way that no
more changes will be necessary.
When connecting a weighing bridge (not preconfigured by KERN) the
following must be observed:
 Connect weighing bridge with a suitable cable via the second-balance
interface.
Allocation of the interface connection see chapter 16.
 Configure weighing bridge, see chapter 14
 Adjust balance / weighing bridge, see chapter 7