KERN & SOHN ALJ 310-4A - Manual (Page 38)

ALJ/ALS/PLJ/PLS-BA-e-1338 38
9 User menu
The settings of the balance can be changed in the user menu. This way, the balance
can be adjusted to individual weighing requirements.
By the factory the user menu has been set in a way that normally no more changes
must be made, only at special conditions of use.
Navigation in the menu
Access to menu In weighing mode press the MENU button and keep it pressed
until the acoustic signal gets mute.
The first menu item „units“
is displayed.
How to select
menu items Using the MENU button the individual menu items can be
selected one after the other.
 Scroll forward using MENU button
 Scroll backward using CAL button
Change settings Acknowledge selected menu item using PRINT button, the
current setting is displayed. Each time the arrow buttons
 
are pressed the next setting will be displayed.
 Scroll forward using MENU button
 Scroll backward using CAL button
Save settings Take over selection using the PRINT button.
Weighing balance returns to menu. Either make more settings
in the menu or go back to menu mode as follows.
Exit menu/
back to
weighing mode Press the MENU button and keep it pressed until the acoustic
signal gets mute. The balance returns automatically into
weighing mode.