Entraguard bronze, Residence guide telephone entry – Keri Systems EntraGuard Bronze Residence Guide User Manual
Page 14

EntraGuard Bronze
1530 Old Oakland Road, Suite 100
01911-003 Rev. C
San Jose, CA 95112 USA
(800) 260-5265 (408) 451-2520 FAX (408) 441-0309
Web: http://www.kerisys.com E-mail: [email protected]
Page 14 of 14
Residence Guide
Telephone Entry
HOLD OPEN GATE 2 –
FIXED PERIOD OF
TIME
Immediately holds the gate 2
relay open for a finite period
of time.
•
Press .
•
Press
– the desired maximum connection time, in
minutes.
•
Press
. The unit emits a short high-pitched tone to
indicate the gate hold open time has been accepted. A high-
low tone is emitted if an invalid gate hold open time has been
entered.
HOLD OPEN GATE 2 –
INDEFINITELY
Immediately holds the gate 2
relay open indefinitely.
•
Press .
•
Press
. The unit emits a short high-pitched tone to
indicate the gate hold open time has been accepted.
CLOSE GATE 2
Immediately closes the gate
2 relay.
•
Press .
•
Press
. The unit emits a short high-pitched tone to
indicate the close command has been accepted.
a. Sometimes it is necessary to reset the Bronze unit’s microprocessor which resets the unit to factory defaults
(including the programming entry code). This means any pre-programming done by Keri Systems will be
erased. To perform a complete reset, turn unit power OFF. Press and hold the
and
keys while
turning the power ON. Release the
and
keys. The unit is now reset to facotry default values.
Programming Command
Instructions