Entraguard bronze, Residence guide telephone entry – Keri Systems EntraGuard Bronze Residence Guide User Manual
Page 12

EntraGuard Bronze
1530 Old Oakland Road, Suite 100
01911-003 Rev. C
San Jose, CA 95112 USA
(800) 260-5265 (408) 451-2520 FAX (408) 441-0309
Web: http://www.kerisys.com E-mail: [email protected]
Page 12 of 14
Residence Guide
Telephone Entry
SET GATE 2 RELAY
ACCESS CODE
Allows a user to activate the
gate 2 relay from the
residence telephone.
•
Press .
•
Press
– the desired relay access code (default = 2).
•
Press
. The unit emits a short high-pitched tone to
indicate the access code has been accepted. A high-low tone
is emitted if an invalid access code has been entered.
SET GATE 2 RELAY
TIMEOUT
Sets the amount of time the
gate 2 relay is activated.
•
Press .
•
Press
– the desired relay timeout value (default = 5
seconds).
•
Press
. The unit emits a short high-pitched tone to
indicate the timeout value has been accepted. A high-low
tone is emitted if an invalid timeout value has been entered.
SET CALL
FORWARDING
TELEPHONE NUMBER
Sets an alternate telephone
number to which entrance
request calls can be
forwarded.
•
Press .
•
Press
–
the
desired
forwarding telephone number (up to 20 digits).
•
Press
. The unit emits a short high-pitched tone to
indicate the telephone number has been accepted. A high-low
tone is emitted if an invalid telephone number has been
entered.
ENABLE CALL
FORWARDING
Enables the call forwarding
feature.
•
Press .
•
Press
. The unit emits a short high-pitched tone to
indicate call forwarding has been enabled.
DISABLE CALL
FORWARDING
Disables the call forwarding
feature.
•
Press .
•
Press
. The unit emits a short high-pitched tone to
indicate call forwarding has been disabled.
Programming Command
Instructions