Keri Systems EntraGuard Gold Quick Start - Manual (Page 19)

EntraGuard
®
Gold Telephone Entry Controller
1530 Old Oakland Road, Suite 100 01801-001 Rev. 2.2
San Jose, CA 95112 USA
(800) 260-5265 (408) 451-2520 FAX (408) 441-0309
Web: http://www.kerisys.com E-mail: [email protected]
Page 19 of 32
EntraGuard
®
– Gold
Quick S
tart Guide
5.2.2.1 Direct Serial Connection – Controller to PC
To make the connection between the EntraGuard master controller and the host computer you will use one cable.
• If the host computer has a male DB-9 connector on the serial port, you must use a Keri Systems KDP-252 cable or
create a cable according to the drawings in Figure 19 or Figure 20.
• If the host computer has a male DB-25 connector on the serial port, you must use a Keri Systems KDP-251 cable or
create a cable according to the drawing in Figure 21 on page 20 or Figure 22 on page 20.
The Keri Systems part number for this cable is KDP-252.
Figure 19: PC/DB-9F to Telephone Entry/DB-9M RS-232 Direct Serial Connections
1
Figure 20: PC/DB-9F to Telephone Entry/TB-12 RS-232 Direct Serial Connections 2
1. For all EntraGuard Gold controllers with the alpha numeric keypad and EntraGuard Gold controllers with
the mechanical (standard) keypad with part numbers 05712-001, 05712-002, and 05713-001.
2. For EntraGuard Gold controllers with the mechanical (standard) keypad with part numbers 05720-001,
05720-002, and 05721-001.