Keri Systems EntraGuard Gold Quick Start - Manual (Page 10)

EntraGuard
®
Gold Telephone Entry Controller
1530 Old Oakland Road, Suite 100 01801-001 Rev. 2.2
San Jose, CA 95112 USA
(800) 260-5265 (408) 451-2520 FAX (408) 441-0309
Web: http://www.kerisys.com E-mail: [email protected]
Page 10 of 32
Quick S
tart Guide
EntraGuard
®
– Gold
4.3 Connecting a Door Status Input
Each EntraGuard Gold controller is shipped with an installation kit including all necessary terminal blocks and
transorbs. One of these terminal blocks has a jumper across pins 1 and 2. This terminal block is designated for use on
TB-4. If a door switch is not used on the controller, this jumper prevents a continuous door open status alarm from
being received by the controller. If a door switch is used, simply remove this jumper and install the door switch leads.
Figure 8: Door Status Input Connections
4.4 Connecting a Request to Exit (RTE) Input
Figure 9: Request to Exit Input Connections