Keri Systems EntraGuard Platinum Quick Start - Manual (Page 16)

EntraGuard
®
Platinum Telephone Entry Controller
Quick Start Guide
Page 16 of 28 P/N: 01969-001 Rev. C
6.2.2.1 Direct Serial Connection – Controller to PC
To make the connection between the EntraGuard master controller and the host computer you will use one cable.
• If the host computer has a male DB-9 connector on the serial port, you must use a Keri Systems KDP-552 cable or
create a cable according to the drawing in Figure 17.
• If the host computer has a male DB-25 connector on the serial port, you must use a Keri Systems KDP-251 cable or
create a cable according to the drawing in Figure 18 on page 16.
The Keri Systems part number for this cable is KDP-552.
Figure 17: PC/DB-9F to Telephone Entry/TB-12 RS-232 Direct Serial Connections
The Keri Systems part number for this cable is KDP-251.
Figure 18: PC/DB-25F to Telephone Entry/TB-12 RS-232 Direct Serial Connections