Keri Systems EntraGuard Platinum Quick Start - Manual (Page 10)

EntraGuard
®
Platinum Telephone Entry Controller
Quick Start Guide
Page 10 of 28 P/N: 01969-001 Rev. C
5.5 Connecting a General Purpose Input
The general-purpose input is used in conjunction with the programmable input/output feature of the Doors access control
software. There are two possible uses for the general-purpose input.
• the master controller may be configured for either Global Unlock (see Figure 9) or Auxiliary A-door RTE (see Figure
10)
• the slave unit can only be configured for Auxiliary A-door RTE (see Figure 10)
Make the following connections for a Global Unlock input. (For a master controller only.)
Figure 9: Global Unlock Input Connections
Make the following connections for an Auxiliary RTE A-door input.
Figure 10: Auxiliary A-Door RTE Input Connections