Compaq R6000 Series - Manual (Page 64)

Configuration 4-7
Compaq Confidential – Need to Know Required
Writer: Daniel E. Lyons Project: Compaq R6000 Series UPS Operation and Reference Guide Comments: Revised as per A. May
Part Number: 347223-022 File Name: e-ch4.doc Last Saved On: 3/24/99 1:44 PM
Load Power Off
The power feeding the UPS-protected devices has terminated. “X” is the
number of alarms triggered when the load power was terminated.
Load Power Off
X Alarms
Load Power On
Utility power has been restored to the devices backed up by the UPS. “X” is
the number of alarms triggered when the load power resumed.
Load Power On
X Alarms
Overload
There are so many loads attached that the UPS cannot protect them properly
anymore. “X” is the number of alarms triggered when the overload occurred.
Overload
X Alarms