Compaq R6000 Series - Manual (Page 27)

2-2 Compaq R6000 Series UPS Operation and Reference Guide
Compaq Confidential – Need to Know Required
Writer: Dan Lyons Project: Compaq R6000 Series UPS Operation and Reference Guide Comments: revised as per A. May
Part Number: 347223-022 File Name: c-ch2.doc Last Saved On: 3/24/99 1:41 PM
Installation Considerations
Weight
68-136 kg
150-300 lb
WARNING: This product is heavier than it appears. To reduce the risk of
personal injury or damage to the equipment:
■ Observe local occupational health and safety requirements and
guidelines for manual material handling.
■ Obtain adequate assistance to lift and stabilize the product during
installation or removal. The product will be unstable when not
fastened to the rails.
■ Remove all pluggable power supplies and modules to reduce the
overall weight of the product.
Position
68-136 kg
150-300 lb
WARNING: To reduce the risk of personal injury or damage to the
equipment, take the following precautions when installing the
equipment:
The Compaq R6000 UPS and the Extended Runtime Modules (ERMs)
MUST be installed at the bottom of the rack. If placed in rack with
existing equipment, the rack must be re-configured to allow installation
of UPS at the bottom of the rack.
The Compaq R6000 UPS must be mounted on the fixed rails included
in the UPS package. Refer to the appropriate installation card and rack
template, also shipped with your Compaq R6000 UPS kit for
instructions on rack-mounting the Compaq R6000 UPS.