Cisco OL-21851-01 - Manual (Page 23)

5-23
Cisco Unified Communications Manager Configuration Guide for the Cisco TelePresence System
OL-21851-01
Chapter 5 Configuring and Managing the Cisco Unified IP Phone
Assigning a Directory Number for the Shared-Line Cisco Unified IP Phone
• Forwarded Call Information Display on Device X, page 5-24
Configuring Directory Number Information
To configure directory number information:
Step 1 Enter the directory number settings for the shared Cisco Unified IP Phone line using the information in
Table 5-10 as a guide.
Step 2 Make sure that the following check box at the bottom of the Directory Number Information window
is marked as indicated:
• Active: Checked
Step 3 Click Save to save your settings.
Enabling Auto Answer Option
To enable the Auto Answer option:
Step 1 Choose Auto Answer with Speakerphone in the Auto Answer drop-down menu. Use default settings
for all other selections. See the “Directory Number Settings” section on page 1-33 .
Step 2 Click Save to save your settings.
Call Forward and Call Pickup Settings
Leave all fields unchanged. See the “Call Forward and Call Pickup Settings” section on page 1-35 .
Table 5-10 Shared-Line Directory Number Information
Field Required? Setting
Directory Number Yes Directory number for the Cisco Unified IP Phone
7970 Series.
Route Partition —
Description
Alerting Name
ASCII Alerting Name