Cisco OL-21851-01 - Manual (Page 10)

5-10
Cisco Unified Communications Manager Configuration Guide for the Cisco TelePresence System
OL-21851-01
Chapter 5 Configuring and Managing the Cisco Unified IP Phone
Configuring the Cisco Unified IP Phone
Note Leave all fields unchanged.
MLPP Information
Leave the multilevel precedence and preemption information (MLPP) Domain field as .
Do Not Disturb
Table 5-7 describes fields found in the Do Not Disturb (DND) section on the Phone Configuration page.
Secure Shell Information
Table 5-8 describes fields found in the Secure Shell Information section on the Phone Configuration
page. Leave all fields unchanged.
Product Specific Configuration Layout
Table 5-9 describes fields found in the Product Specific Configuration Layout section on the Phone
Configuration page. Leave all fields unchanged. To access this information from the administration
interface, click the question mark icon (online help) located at the top of the
Product Specific
Configuration Layout Area box.
Table 5-6 Cisco Unified IP Phone 7970 Series Extension Information
Field Required? Setting
Check-Box
Enable Extension Mobility
— Leave box unchecked.
Log Out Profile — Current Device Settings.
Log in Time —
Log Out Time
Table 5-7 Cisco Unified IP Phone 7970 Series Do Not Disturb Fields
Field Required? Setting
Check-Box
Do Not Disturb
— Leave box unchecked.
DND Option Yes Common Phone Profile Setting.
DND Incoming Call Alert —
Table 5-8 Cisco Unified IP Phone 7970 Series Secure Shell Information Fields
Field Required? Setting
Secure Shell Admin User — Leave field blank.
Secure Shell Admin Password